Chapter 15.32 ELECTRICAL CODE
Section 15.32.050 Installation or alteration of electrical equipment--Permit required.
Work permits are required for all electrical installations,
alterations and replacements of
electrical wiring, equipment, supplies or devices to be installed in or on property or
improvements on property in the City, as follows:
A. Where any building is undergoing
remodeling, all changes to be made to the electrical
installation must be reviewed with the Citys Electrical Inspector and a work permit obtained
before the work proceeds.
B. The Citys Electrical Inspector
shall issue work permits to licensed electrical contractors
or a homeowner, provided the homeowner personally performs the electrical work and provided
the electrical work is to be installed in the home occupied by the owner and that the home is a
single family residence or owner occupied duplex.
C. When a work permit is issued, as
provided in the preceding subsection B of this section,
the Electrical Inspector will inspect such installation and will issue a certificate of approval if
the
installation meets the requirements of the Citys Electrical Code. If the installation fails to
meet
the requirements of the Citys Electrical Code, the permit shall be revoked. (Ord. 1840 §
1, 2000:
Ord. 1431 § 3-1, 1996)
15.32.050
(15.32.050 (Ord. 2043), Amended, 04/15/2002, Prior Text)