Chapter 17.54 BUSINESS PARK ZONING CODE
Section 17.54.200 Off-street loading requirements.
Adequate space shall be provided to accommodate the loading
and unloading of trucks,
tractors and trailers servicing any commercial, service or industrial use. The standards required
for the provisions of such spaces are described herein. Loading berth space which is utilized for
the location of trash collection or compaction units shall be provided for and shall be in addition
to the loading space requirements provided herein.
A. Area of Loading Berths or Space.
A required off-street loading berth or space shall be at
least twelve (12) feet in width and at least fifty (50) feet in length, exclusive of aisle and
maneuver space, and shall have a vertical clearance of at least fourteen (14) feet.
B. Access to Loading Areas. Each required
off-street loading space or berth shall be afforded
a means of vehicular access to a street, highway, or alley in a manner which will least interfere
with traffic movement as approved by the city engineer.
C. Surfacing. All off-street
parking and loading areas in business park zoned districts in the
City shall be constructed and maintained in accordance with the requirements of Sections
17.44.010 and 17.44.020 of Chapter 17.44 (OFF-STREET PARKING AND LOADING) of this
Zoning Code. Said off-street parking area and loading area standards are the minimum standards
the City shall allow for off-street parking and loading area construction and maintenance in a
Business Park Zoned District in the City.
D. Location. All loading berths or
spaces shall be located at the side or rear of the building
served.
E. Schedule of Off-Street Loading
Spaces.
1. Offices: one loading space shall
be provided for each such use having greater than six
thousand (6,000) square feet of gross floor space.
2. Industrial, warehouse, service
and retail uses: every building or use of land consisting of
over three thousand (3,000) square feet of gross floor area designed or adaptable for retail
business purposes, or warehouse, wholesale, manufacturing or service business use shall be
provided with loading space as follows:
Number of Loading
Total Gross Floor Area Spaces Required
Up to 15,000 sq. ft. 1 space
15,000 to 50,000 sq. ft. 2 spaces
50,000 to 100,000 sq. ft. 3 spaces
Each additional 100,000 sq. ft. 1 additional
space
3. Other similar uses: the city council
(with the recommendation of the city planning
commission and/or the city building inspector) shall determine to which of the above categories
of loading regulation any specific use not listed above shall belong, or determine other
appropriate standards for addition to this section by amendment whenever the above regulations
prove inapplicable. (Ord. 1743 § 1 (part), 1999)
17.54.200
(17.54.200 (Ord. 2191), Amended, 07/07/2003, Item C Amended., Prior Text)